Parameter	Value	Comments
0002	0000 0001
0552	9 (Baud Rate)
	6 = 300
	7 = 600
	8 = 1200
	9 = 2400
	10 = 4800
	11 = 9600
TV On/Off	0 = Disabled
Punch Code	1 = ISO
I/O Channel	0
Drip Feed. Enable Para G127.5 Select Auto/DNC Mode on the control. Press Cycle Start. Then go to the computer, prepare the program and click 'Send'. As data Begins to flow the machine moves.
In EasyDNC set Baud Rate, Parity, DataBits and StopBits as above. Set 'Mode=Auto or Fanuc'

Cable shown here is most common supporting xOn/xOff (DC1/DC3) flow control. If your CNC is configured to use RTS/CTS (Hardware) flow control then see the alternative cable diagram here.